Purchasing:

– Purchase a quart first instead of a large quantity in case you’re not dedicated to the color. Paint a piece of foam board and move it across the area to see how the color is affected by the light at different times of the day.
The experts recommend 1 gallon for every 400 square feet. Covering unprimed, coarse or textured surfaces may require more.
– Do not apply latex onto an oil end and vice versa without first trimming the walls (remember to put on a mask) and wiping away the dust particles using a tack cloth. Employ a primer of the identical composition (latex or oil) of the intended topcoat. To tell whether your present wall color is water- or oil-based, douse a white cloth with rubbing alcohol and then rub it on the wall (within a out-of-the-way spot). If the paint softens and begins to transfer onto the cloth, it’s water based. If the alcohol doesn’t remove any color, it’s oil-based.
– Don’t underestimate how long it’ll take you to get the job finished. Allow at least 24 hours to dry before bringing everything back into the room. Allow 2 weeks to 30 days to cure before washing or draining.
– Paints have volatile organic chemicals (VOCs ) that could release toxic gas to the atmosphere for many years after a room has been painted. Paint with low-VOCs or zero-VOCs. -Paints using a green seal possess a VOC of less than 150 grams/liter of non-flat and less than 50 grams/liter for flat.
Prep:
– Paint does not stick very well to dirty walls, so clean them with soap and water (or TSP) and rinse with water once done. Let dry.
– Clean ceilings before painting. There’ll be cobwebs and dust that you don’t see. Overlap the tape seams by at least an inch to avoid seepage between pieces, and after that seal the tape.
– Don’t cover the floors with plastic as it can be very slippery. useful content Use drop cloths or sheets to protect them from splatters and drips.
– The colour mixer at the paint store can create small variations from can to can. The last thing you want is to have two shades of a color on the wall. This can be remedied by blending all of the paint cans before you begin painting to ensure you will have consistent color.
– Fill holes with spackle with a five-in-one instrument or broad blade and caulk where necessary. Sand dry spackle smooth, and deepest every spot.
– Don’t underestimate how long it is going to take you to find the task finished. Allow at least 24 hours to dry before bringing everything back. Allow two weeks to 30 days to cure before wiping or washing.
– Eliminating socket covers makes for a much neater paint job. Tape the screws into the cover , and tape over the light or socket switch to keep paint.
Painting Ceilings:
– Scaffolding comes in components named “dollars” and “cross bucks”. For a high ceiling, four bucks should suffice. Each dollar prices about $12 a day to rent. You want: walk boards or boards to place along the bucks, these rent for about $10 every per day. -for scaffolding, Wheels rent individually. They are important because they enable the scaffolding to transfer . Four wheels rent for approximately $25 a day.
– When painting a textured ceiling, make certain to use a thick-nap roller to make certain you get full coverage over the lumps and irregularities in the textured surface. To get a drywall ceiling that is smooth, you can use a roller.
DSEQ507_how-to-waterproof-cinderblock_s4x3

– Use an edger instead of painter’s tape. Buy a good excellent edger (they’re fairly cheap) and take your time at the corners so that you don’t spend all of the excess time taping everything off.

– If you take a rest whilst painting, cover rollers in plastic wrap and refrigerate so that you don’t need to wash them every time you stop.
– Consider skipping the paint trays and using a five-gallon bucket with a roller display indoors. This saves time on filling and re-filling the bucket.
– Use a hammer and nail to poke holes in the rim of the paint can. It enables the paint.
Tools:
– Utilize a nylon-bristle brush for water-based paint and natural bristles to get oil-based paint. Don’t use bristlesbased paint, the water can make the limp. Foam brushes are good for intricate work like painting molding or window casings. These brushes normally last for only 1 use because they’re hard to clean and easy to tear.
– If your project demands oil-based paint, natural bristles like ox or hog hair are ideal because they hold paint better than artificial bristles.
– If you’re using latex paint, then nylon and polyester brushes are a lot better because they do not absorb water like natural fibers.
– Good all-purpose brushes are flagged, meaning the bristles vary in length slowly coming to a peak in the center of the brush. Brushes that are flagged offer a smooth, even exact coating of paint.
– Utilize the ideal roller for the job. For smooth surfaces such as wood and wallboard, use a roller with a rest. For surfaces with feel, larger naps can reduce the number of coatings — and the period of time spent painting.
Clean Up:
– Use soap and water to wash latex paint off the brush immediately after painting. If the paint dries on the brush, then you are going to need solvents to get rid of it. If your residence is on a sewer system, you can wash the brushes in your sink, but you should be careful to not eliminate paint in an area where it may seep into the groundwater.
– For oil-based paints, you are going to need a solvent such as paint thinner or mineral spirits. Pour about two inches of thinner into a metal container and then swirl the dirty brush inside until the paint comes off.
– Moist paintbrushes can be wrapped in plastic or waxed paper and coated with a rubber band or aluminum foil. Hang brushes down to maintain their shape.
– Maintain a stash of paint for touch-ups in a little plastic cup or glass jar, such as margarine containers or baby food jars (totally cleaned, of course). Be sure to label each container with the color and manufacturer name.
– A common problem known as “hatbanding” takes place when painters use a paintbrush for clipping in and a roller to apply the rest of the paint, so producing a different texture across the ceiling and trim. To prevent hatbanding, roll the paint as regions as possible.